TreatLife/Esmlfe DS03 Fan Dimmer Combo Beken 🅱️

Single gang Decora fan controller & light dimmer combo. This fan/dimmer combo can be flashed with ESPHome via the Tuya-CloudCutter process all over-the-air with no soldering. See here for the Complete How To Guide

Purchase via Amazon

GPIO Layout

GPIO	Component	Description
P10	Secondary MCU RX
P11	Secondary MCU TX

ESPHome YAML

esphome:
  name: treatlife-fan
  friendly_name: treatlife-fan
  name_add_mac_suffix: false

bk72xx:
## Uncomment the board type you need below (check your kickstart version/name installed on the device if you are unsure)
#  board: generic-bk7231t-qfn32-tuya
#  board: generic-bk7231n-qfn32-tuya

logger:
  baud_rate: 0

## Uncomment to add local time and avoid the "LOCAL_TIME_QUERY is not handled because time is not configured" log error
#time:
#  - platform: homeassistant
#    id: homeassistant_time
tuya:
#  time_id: homeassistant_time

web_server:
api:
ota:
captive_portal:
mdns:

uart:
  rx_pin: P10
  tx_pin: P11
  baud_rate: 115200  

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
#  domain: !secret wifi_mydomain    
  ap:
    ssid: ${name}AP
    password: "ESPNotHome"

button:
- platform: restart
  name: Restart

debug:
  update_interval: 30s

text_sensor:
- platform: debug
  reset_reason:
    name: Reset Reason
- platform: libretiny
  version:
    name: LibreTiny Version

sensor:
- platform: uptime
  name: Uptime

light:
  - platform: "tuya"
    name: Light
    dimmer_datapoint: 10
    switch_datapoint: 9
# change the dimmer_datapoint to 6 and switch_datapoint to 101 if these do not work - check the esphome logs and press the buttons on the switch faceplate to confirm
    min_value: 100
    max_value: 1000

fan:
  - platform: "tuya"
    name: Speed
    switch_datapoint: 1
    speed_datapoint: 3
    speed_count: 4