Vont Color Pro SLB04-RCWV1 A19 RGB+CT

5 Channel RGB+CT E26 810 lumen bulb with an ESP32-C3. This smart bulb can flashed via soldering without destroying the bulb.

Purchase via Amazon

digiblurDIY Video

Quick Setup via Tasmota Console Command

backlog template {"NAME":"Vont ESP32-C3 A19 RGBCT","GPIO":[0,0,0,452,419,418,416,417,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1,"CMND":"so92 1"}; module 0; so92 1; so59 1

Tasmota Template

{"NAME":"Vont ESP32-C3 A19 RGBCT","GPIO":[0,0,0,452,419,418,416,417,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1,"CMND":"so92 1"}

GPIO Layout

GPIO	Component	Description
GPIO03	PWM_i 5	Warm White
GPIO04	PWM 4	Cool White
GPIO05	PWM 3	Blue
GPIO06	PWM 1	Red
GPIO07	PWM 2	Green

TASMOTA Settings

Setting	Description
setoption92 1	Set the correct color temperature method
setoption59 1	Report light state changes via MQTT

ESPHome YAML Config

substitutions:
  display_name: <your display name>
  friendly_name: <your friendly name>

esphome:
  name: ${display_name}
  platformio_options:
    board_build.mcu: esp32c3
    board_build.variant: esp32c3  

esp32:
  variant: ESP32C3
  board: esp32dev
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_BT_BLE_50_FEATURES_SUPPORTED: y
      CONFIG_BT_BLE_42_FEATURES_SUPPORTED: y
      CONFIG_ESP_TASK_WDT_TIMEOUT_S: "10"

logger:
api:
ota:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

output:
 - platform: ledc
   id: red_output
   pin: GPIO6
 - platform: ledc
   id: green_output
   pin: GPIO7
 - platform: ledc
   id: blue_output
   pin: GPIO5
 - platform: ledc
   id: white_output
   pin: GPIO4
 - platform: ledc
   id: ct_output
   inverted: true
   pin: GPIO3

light:
 - platform: rgbct
   restore_mode: RESTORE_DEFAULT_ON
   name: "${friendly_name}"
   red: red_output
   green: green_output
   blue: blue_output
   white_brightness: white_output
   color_temperature: ct_output
   cold_white_color_temperature: 153 mireds
   warm_white_color_temperature: 500 mireds
   color_interlock: true

Pics